ASST Fan Profile [Standard]

This item appears only when you enable the Assistant Q-Fan Control feature. It allows you to set the appropriate performance level of the assistant fan.

[Standard] Set to make the assistant fan adjust automatically depending on the chassis temperature.

[Silent]

Set to minimize the fan speed for quiet assistant fan operation.

[Turbo]

Set to achieve maximum assistant fan speed.

[Fan Off]

Set to turn off all assistant fans.

[Manual]

Set to assign detailed fan speed control parameters.

The following items appear only when you set the Assistant Fan Profile to [Manual].

ASST Upper Temperature [70]

Use the <+> and <-> keys to adjust the maximum assistant fan duty cycle and temperature upper limit. The values range from 40ºC to 90ºC.

ASST Fan Max. Duty Cycle(%) [100]

Use the <+> and <-> keys to adjust the maximum assistant fan duty cycle. The values range from 20% to 100%. When the temperature reaches the upper limit, the assistant fan will operate at the maximum duty cycle.

ASST Lower Temperature [40]

Displays the lower limit of the temperature.

ASST Fan Min. Duty Cycle(%) [60]

Use the <+> and <-> keys to adjust the minimum assistant fan duty cycle. The values range from 0% to 100%. When the temperature is under 40ºC, the assistant fan will operate at the minimum duty cycle.

Allow Fan Stop [Disabled]

Allows your assistant fans to run at 0% duty cycle when the motherboard’s temperature drops to a certain degree.

Configuration options: [Disabled] [Enabled]

Fan Overtime [1 minute]

Allows you to extend the turbo fan’s working time for good heat dissipation and lowers the temperature after system shutdown.

Configuration options: [Disabled] [1 minute] [3 minutes] [5 minutes] [10 minutes]

Anti Surge Support [Enabled]

This item allows you to enable or disable the Anti Surge function for UVP or OVP protection. Configuration options: [Disabled] [Enabled]

3 Chapter

3-42

Chapter 3: BIOS setup