4.3.4USB 3.0 Boost
USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically speeds up the transfer rates of your USB storage devices.
Launching USB 3.0 Boost
To launch USB 3.0 Boost, click or tap the 
on the top edge of the AI Suite 3 main menu, then select USB 3.0 Boost.
Using the USB 3.0 Boost
1.Connect a USB 3.0 device to the USB 3.0 port.
2.From the USB 3.0 Boost screen, Click or tap to select a USB device.
3.To enable UASP on your USB device, click UASP. To revert to its normal transfer rate, click Normal.
USB 3.0 Boost screen
Click or tap to select a USB device
Click or tap to enable the USB device’s normal data transfer rate
Click or tap to enable UASP or Turbo Mode to the USB device for a faster data transfer rate
• Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration.
•Use the USB 3.0 devices for high performance. The data transfer speed varies with USB devices.
4 Chapter
Chapter 4: Software support |