4.3.8USB Charger+

USB Charger+ allows you to quick-charge your portable USB devices even if your computer is off, in sleep mode or hibernate mode.

Before using the USB Charger+, ensure to disable the ErP Ready item from the Advanced > APM > ErP Ready in the Advanced mode of the BIOS setup program.

Launching USB Charger+

To launch USB Charger+, click or tap the on the top edge of the AI Suite 3 main menu, then select USB Charger+.

USB Charger+ screen

Click or tap to detect the connected USB device

Indicates that the connected USB device is in charging mode

Click or tap to select the type of USB device that you wish to charge when the system is off

Click or tap to fast-charge your USB device

Click or tap to stop charging your USB device Click or tap to apply the settings

Click or tap to discard the settings

Ensure to connect your USB device into the USB port that supports this utility. Refer to section 2.3.1 Rear I/O connection of your user manual for more details.

• The USB Charger+ does not support USB hubs, USB extension cables, and generic USB cables.

•The USB Charger+ may not recognize some ASUS devices due to a special design.

4 Chapter

4-24

Chapter 4: Software support