PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These settings only apply when Fast Boot is enabled.
[Auto]For a faster POST time, PS/2 devices will only be available when the system boots up or rebooted when the PS/2 devices have not been reconnected or changed. If you disconnect or change PS/2 devices before restarting the system, PS/2 devices will not be available and BIOS setup program will not be accessible via PS/2 devices.
[Full Initialization] | For full system control, PS/2 devices will be available | |
|
| during POST at any circumstances. This process will |
|
| extend POST time. |
[Disabled] |
| For the fastest POST time, all PS/2 devices will not be |
|
| available until your computer enters the operating system. |
Network Stack Driver Support [Disabled] | ||
[Disabled] | Select to skip the network stack driver from loading during POST. | |
[Enabled] | Select to load the network stack driver during POST. | |
Next Boot after AC Power Loss [Normal Boot] | ||
[Normal Boot] | Returns to normal boot on the next boot after an AC power loss. | |
[Fast Boot] | Accelerates the boot speed on the next boot after an AC power loss. | |
HW Fast Boot [Disabled]
Allows the system to enable or disable the HW Fast Boot.
Configuration options: [Disabled] [Enabled]
DirectKey Enable [Go to BIOS...]
[Disabled] | Disables the DirectKey button. The system will only power on or off |
| when you press the DirectKey button. |
[Go to BIOS | Allows the system to power on and go to the BIOS Setup directly when |
Setup] | you press the DirectKey button. |
Chapter 3
ASUS |