5.USB 2.0 connectors (10-1 pin USB78; USB910;������� USB1112;�������� ��������USB1314)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

48 MBps connection speed.

DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

You can connect the front panel USB cable to the ASUS Q-Connector (USB, dark brown) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.

• The USB 2.0 module is purchased separately.

• These connectors are based on xHCI specification. We recommend you to install the related driver to fully use the USB 2.0 ports under Windows® 7.

•The plugged USB 2.0 device may run on xHCI or EHCI mode depending on the operating system’s setting.

Chapter 1

ASUS Z87-PLUS

1-37