Boot Logo Display [Enabled]

[Enabled]

Enables the full screen boot logo display during POST.

[Disabled]

Disables the full screen boot logo display during POST.

Boot Logo Size Control [Auto]

[Auto]

 

Automatically adjusts for Windows® requirements.

[Full Screen]

Maximizes the boot logo size.

Post Delay Time [3 sec]

This item appears only when you set the Full Screen Logo item to [Enabled]. This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds.

This feature will only work when set under normal boot.

Bootup NumLock State [On]

[On]

Set the power-on state of the NumLock to [On].

[Off]

Set the power-on state of the NumLock to [Off].

Wait For ‘F1’ If Error [Enabled]

[Disabled]

Disables the function.

[Enabled]

The system waits for the <F1> key to be pressed when error occurs.

Option ROM Messages [Force BIOS]

[Force BIOS]

The third-party ROM messages will be displayed during the boot sequence.

[Keep Current]

The third-party ROM messages will be displayed only if the third-party

 

manufacturer had set the add-on device to do so.

Interrupt 19 Capture [Disabled]

Allows you to trap Interrupt 19 by the option ROMs.

Configuration options: [Disabled] [Enabled]

Setup Mode [EZ Mode]

[Advanced Mode]

Allows you to go to Advanced Mode of the BIOS after POST.

[EZ Mode]

Allows you to go to EZ Mode of the BIOS after POST.

3 Chapter

3-44

Chapter 3: BIOS setup