4 Chapter

Using Wi-Fi GO! & NFC Remote

Wi-Fi GO! & NFC Remote allows you to remotely control your computer using your smart device.

Launching Wi-Fi GO! & NFC Remote

1. On your smart device, turn on the Wi-Fi connection. Ensure that your smart device is within the same network as your computer.

2.

Tap & NFC Remote > Enter, then tap the computer you want to connect with your smart

 

Wi-Fi GO!

device.

3.Tap OK on the confirmation message.

Remote GO functions

•Cloud GO!: Allows you to remotely control and sync your files across multiple cloud services such as ASUS WebStorage, GoogleDrive™, and DropBox®.

•Remote Desktop: Allows you to remotely control your desktop in real time using your smart device.

•DLNA Media Hub: Allows you to stream media files to a DLNA-supported device and remotely control playback using your smart device.

•File Transfer: Allows you to transfer files between your computer and your smart device.

Using the Wake-on-LAN

If you want to wake up your computer using the smart device, ensure that you enable the computer’s Wake-on-LAN settings. To configure your computer’s Wake-on-LAN settings:

1.From BIOS Setup, go to Advanced > APM then set Power On By PCIE/PCI item to [Enabled].

2.From Windows® OS, do the following:

a.On your desktop, click Start, right-click Computer > Manage to launch the Computer Management screen.

b.Click Device Manager to view all the installed devices.

c.Click Network Adapters, right-click Intel® Ethernet connection I217-V then click Properties > Power Management tab.

d.Tick these items Wake on Magic Packet from power off state.

4-12

Chapter 4: Software support