If, for any reason, you need to know the pinouts for the modular jacks on the PagePac 6 or PagePac 6 Port Saver, pinout information is given below.
PagePac 6 PAGE Jack
| Pin* | Cord Lead† | Function | Connect to Paging Port |
| 1 | Not Used | Not Used | Not Used |
| 2 | Black | Access Control (C) | Dry Contact Closure (C) |
| 3 | Red | Ring | Ring |
| 4 | Green | Tip | Tip |
| 5 | Yellow | Access Control (C1) | Dry Contact Closure (C1) |
| 6 | Not Used | Not Used | Not Used |
|
|
|
|
|
*Pins numbered from left to right, as seen when looking into jack. †When using a standard modular cord.
Note: A telephone system paging port dry contact closure is required to connect pins 2 and 5 of the PAGE jack together to access paging.
PagePac 6 Port Saver C.O. LINE and PHONES Jacks
Pin* | Cord Lead† | Function | Connect to Line Jack |
1 | Not Used | Not Used | Not Used |
2 | Not Used | Not Used | Not Used |
3 | Red | Ring | Ring |
4 | Green | Tip | Tip |
5 | Not Used | Not Used | Not Used |
|
|
|
|
6 | Not Used | Not Used | Not Used |
*Pins numered from left to right, as seen when looking into jack. †When using a standard modular cord.
17
