Telephone System

Incoming

Line Jack

3

Installation Procedure

PagePac 6 can be placed on a desk or shelf, or wall-mounted using the keyhole slots in the bottom of the unit. After selecting a convenient location:

1.Connect the Trunk Adapter modular cord to the PagePac 6 PAGE jack.

2.Connect the Trunk Adapter power cord to the PagePac 6 POWER OUT jack.

3.Connect the Trunk Adapter jack J2 to the telephone system page jack with a standard modular cord.

4.Plug the PagePac 6 power cord into a standard AC wall outlet, or use an extension cord if necessary.

7

Page 9
Image 9
AT&T 146 installation manual Telephone System Incoming Line Jack