ATT-1855CIB-d05.qxp 4/8/2005 5:39 PM Page 20
MSG#
Ao
“AO” (Announce Only) stops flashing after an announcement is recorded.
1
SET UP
Press and hold for 1 second to enter feature menu.
“Selected announcement is A”
2
SKIP/REPEAT
“Announce Only”
3
PLAY/STOP
Or
Answering System Operation
Announce Only mode
In Announce Only mode, callers hear an announcement but cannot leave messages.This option is useful, for example, to notify callers that you will be away for an extended period and request that they call back after a certain date.
To turn Announce Only on or off
Press and hold until you hear “Selected
announcement is A” Then press SKIP/REPEAT until you hear the option you want:
•A: Callers hear current outgoing announcement and can leave messages.
•Announce Only: Callers hear current outgoing announcement and cannot leave messages.
Press PLAY/STOP to save your selection and exit, or press again to change other features (see page 21).
To record your outgoing announcement
After turning on the Announce Only feature, follow the procedure on page 19 to record your announcement.
If you do not record an announcement, incoming calls will be answered after 10 rings, but callers will hear “No Announcement” and will not be able to leave a message.
20
