INSTALLATION
4Charge the handset battery.
•Place the handset in the base (or the spare charger).
•Charge the battery at least 12 hours. After the first charge, the battery will charge in eight hours.
5Check for dial tone.
•After the batteries are charged, lift the handset and press P; you should hear a dial tone.
Spare Charger Installation
1 Connect the power cord attached to the spare charger to an electrical outlet not controlled by a wall switch.
2 Follow Steps
Belt Clip
Attach belt clip to the cordless handset (optional).
Headset
a)Slide down into grooves to attach.
b) Push up 
and away 
to remove.
You can use this telephone
Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.
3
