AT&T 265 user manual Set Local Area Codes LACs

FEATURE SETTINGS

Set Local Area Codes (LACs)

Local area codes are area codes associated with other telephone numbers for which you must dial the area code, but do not need to dial 1.This includes your own area code if you must dial the area code but not 1 to make calls in your own area code.

Up to four local area codes can be programmed.

Do not program area codes for which you must dial a 1.

If you dial…	For…	Then, in steps 2-4
11 digits	All calls outside your own	Make no entry.
(1 + area code + phone	area code
number)
10 digits	Some calls outside your own	Enter area codes that do
(area code + phone	area code	not require a 1.
number)
10 digits	All calls within your own	Enter your own area
(area code + phone	area code	code.
number)

1.After setting the home area code (or press OPTIONS three times from the idle screen), the screen will display:

2.Press P or Q until the screen displays the first digit of the first local area code. Do not use the keypad to enter digits.

3.Press DISPLAY DIAL to save the digit and advance to the next digit.

4.Repeat steps 2 and 3 for the second and third digits of the local area code.

5.Press OPTIONS to program another local area code when the screen displays

:

6.Repeat steps 2-5 to enter the digits of the next local area code.

7.Repeat steps 2-5 to program a third and fourth local area code.

8.Press OPTIONS to save the local area codes and continue to set the time/

.date

20