AT&T 265 Setting Options Call Log, Display Dial, Review Call Log, Receiver will, Unknown calls

CALLER ID OPERATION
Setting Options
Call Log
A number (from 01 to 80)
is assigned numerically in
ascending order for each
incoming call.The most
recent call will have the high-
est number. Only the newest
entry from a telephone
number will be saved.When
the memory is full, the oldest
call information is replaced		Display Dial
by the new incoming call		Dial a displayed
information.		telephone number
Review Call Log		when reviewing calls
The screen displays call informa	-	in call log.
tion for about 10 seconds after it		1. Press P or Q
has been received.		until the screen
This function can be accessed		displays the desti-
regardless of whether the handset		nation number.
is lifted or not.		2. Press DISPLAY
1. Press P or Q to activate the		DIAL to make
call list and display the latest		the call, LIFT
caller ID entry.		RECEIVER will
2. Press Q once to show the		be displayed.
previous caller ID entry. Press Q		3. Lift the handset,
repeatedly to scroll through the		the number shall
call list in reverse chronological		be dialed out or
order (from the latest entry to		press the CLEAR
the earliest entry), or		key to cancel this
3. Press P twice when the screen		operation.
is in idle mode and it will show
-END OF LIST-.Then press		NOTE:
Prepeatedly to scroll through		The display dial fea-
the call list in chronological		ture cannot be used
order (from the earliest entry to		to dial PRIVATE or
the latest entry).		UNKNOWN calls.

4.At the end of the call list, the screen displays -END OF LIST- and begins again.

29