INSTALLATION
Desktop Installation
1.Remove the mounting adapter from the telephone base by pressing down with your thumbs as indicated by the arrows in the diagram.
2.Turn the mounting adapter upside down so that the telephone line cord channel leads the line out from the top of the telephone base.
3.Replace the mounting adapter by aligning it as shown. Push it downward with your thumbs as indicated by the arrows in the diagram and ensure that it is securely locked into place.
4.Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone base.
5.Thread the cord through the channel and out of the mounting area as shown.
6.Connect the other end to a modular tele- phone jack on the wall.
11
