AT&T 1030, 3070 manual When you dial a number you want to save for later redialing

stop, a Touch-Tone enable, or a switchhook flash.) If you have a 34-button voice terminal, use the instructions below to pro- gram a button with the Saved Number Redial feature. If you have a 5- or 10-button voice terminal, there’s no need for any special programming. You simply dial a code to use this feature, thus saving a feature button for a custom feature that requires a button.

To program: ● T/P to P ● Touch the button ● Dial *74

●T/P to center

If you program a Saved Number button, you can save a number with the touch of a button. So when you dial a number you want to redial later:

●Before hanging up, touch Saved Number.

When you want to save a new number, repeat the above procedure.

To redial the number later:

●Lift your handset.

●Touch Saved Number.

Using a Dial Code (5- and 10-button voice terminals only)

When you dial a number you want to save for later redialing:

Saved Number

+Saved Number

●Before hanging up, dial #23.

To redial the number you saved:

●Lift your handset.

●Dial #23.

#23

+

#23

24