AT&T 6200 Making a Net2Phone Call, Handset Ringer Style, Ringer Off/Battery Save, Headset Jack

Models: 6200

1 8
Download 8 pages 33.14 Kb
Page 5
Image 5

TELEPHONE OPERATION

Making a Net2Phone Call

Press P, on the cordless handset to access your Net2Phone account. Follow the voice prompts to complete your call.

Changing your Net2Phone Access Number

This phone is pre-programmed to dial 1 866 333-8506

when you press . If Net2Phone provides you with a local access number in your area you will need to reprogram the net2phone button on your cordless handset.

Note: Following this procedure without dialing new digits in Step 3 will erase the Net2Phone memory.

1Make sure the handset is off.

2Press g. The PHONE light blinks.

3Dial the local access number Net2Phone has provided.

4Press Pfive times.

5Press .

Handset Ringer Style

You can select from four different handset ringer styles.

1Make sure the handset is off.

2Press g, #.

3Press 1, 2, 3 or 4 to select your ringer style. You will hear a sample of the ringer style.

4Press g.

Ringer Off/Battery Save

1Make sure the handset is off.

2Press g, #.

3Press 5.

4Press g.

5To turn the ringer on again, see Handset Ringer Style.

Headset Jack

You can use this telephone hands-free when you install any AT&T 2.5 mm headset, purchased separately.

Plug the headset into the jack located on the right side

of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.

Operating Range

This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright.

If you receive a call while you are out of range, the handset might not ring — or if it does ring, the call might not connect when you press P. Move closer to the base, then press P to answer the call.

If you move out of range during a phone conversation, you might hear noise or interference.

To improve reception, move closer to the base.

If you move out of range without pressing P,

your phone will be left “off the hook.” To hang up properly, walk back into range, periodically pressing

P.

5

Page 5
Image 5
AT&T 6200 user manual Making a Net2Phone Call, Handset Ringer Style, Ringer Off/Battery Save, Headset Jack, Operating Range