![](/images/new-backgrounds/1210684/2106845x1.webp)
INSTALLATION
Wall Installation
1 Position the wall mount
adapter on the base.
2 Connect the telephone line cord.
3 Connect the power cord.
4 Mount the base on the wall.
5 Follow Steps 3 and 4 in
Table/Desk Installation.
a)Align holes on base
with mounting studs on wall jack.
b) Place power cord as shown, so it hangs straight down between base and wall.
c)Pull base down on mounting studs until it locks into place.
Power Cord
Align tabs on wall mount adapter with holes on bottom of base. Snap wall mount adapter firmly into place.
Mounting
Studs
3