Invacare 6027 Attaching the Platform Attachment

Walker Platform Attachment 2Part No 1141466
 INSTALLATION WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching component parts are secure.
Attaching the Platform Attachment
 WARNING
Ensure that the walker is securely locked into the open position before installing the
walker platform attachment.
NOTE:Forthisprocedure,refertoFIGURE 1.
NOTE:Reversethisproceduretoremovetheplatformattachment.
1. Openwalkerandsecureinlockedpositionbeforeinstallingthewalk erplatform
attachment.
2. Determinewhichsideofthewalkertheplatformattachmentwillbemounted.
3. Loosentheadjustmentontheupperclampassembly(Detail“A”).
4. Opentheclampassemblyandalignitwiththewalkerframe.
5. Closetheclampassemblyoverthewalkerframe.
6. Securelytightentheadjustmentknobontheclampassembly.
7. RepeatSTEPS3to6forthelowerclampassembly(Detail“B”).
FIGURE 1 Attaching the Platform Attachment
Upper Clamp
Assembly
Adjustment
Knob
Adjustment
Knob
Lower
Clamp
Assembly
Walker
Frame
Front of
Walker
DETAIL “A” - UPPER CLAMP ASSEMBLY
DETAIL “B” - LOWER CLAMP ASSEMBLY
Adjustment
Knob
Adjustment
Knob