Adjusting Angle
NOTE: For this procedure, refer to FIGURE 4.
1.Loosen the adjustment knobs that secure the support tube to the U‐clamps.
WARNING
DO NOT apply full weight while adjusting the angle, injury may result.
2.Gently, lay arm on arm pad.
3.Turn the support tube until desired angle is obtained.
4.Retighten adjustment knobs securing the support tube in position.
Arm Pad
Support Tube
U-Clamps
Adjustment
Knobs
FIGURE 4 Adjusting Angle
Adjusting Tilt
NOTE: For this procedure, refer to FIGURE 5.
1. Loosen tilt adjustment knob.
NOTE: This is located where the support tube connects with the arm support.
2.Lift up or push down on arm tube to obtain the desired tilt.
3.Retighten tilt adjustment knob securely.
Arm Tube
Tilt
Adjustment 
Knob
FIGURE 5 Adjusting Tilt
Securing the Arm Strap
NOTE: For this procedure, refer to FIGURE 6.
1.Unfasten arm strap by pulling up on the hook and loop fastening strap.
2.Loosen arm strap by pulling through ring.
3.Slide arm into position.
4.Pull fastening strap until a snug fit is obtained.
5.Fold the hook and loop fastening strap over ring and secure to arm strap.
Arm Strap
Fastening Strap
(hidden from view)
Arm | Ring |
Pad |
|
FIGURE 6 Securing the Arm Strap
Walker Platform Attachment | 4 | Part No 1141466 |
