Attaching/Adjusting the Arm Tube
NOTE: For this procedure, refer to FIGURE 2.
Attaching
1.Loosen arm tube adjustment knob, located just below the arm pad.
2.Slide arm tube into slot provided located underneath arm pad.
3.Adjust arm tube to desired position.
4.Securely tighten the arm tube adjustment knob.
Adjusting
1.Loosen the arm tube adjustment knob, located just below the arm pad.
2.Slide arm tube in or out to the desired position.
3.Securely tighten the arm tube adjustment knob.
Arm Pad
Arm Tube 
Adjustment
Knob
FIGURE 2 Attaching/Adjusting the Arm
Tube
Adjusting Height
NOTE: For this procedure, refer to FIGURE 3.
1.Loosen the adjustment knobs that secure the U‐clamps to the clamp assemblies.
2.Slide support tube through the
U‐clamps up or down until desired position is obtained.
3.Securely tighten adjustment knobs that secure the U‐clamps to the clamp assemblies.
Support |
|
Tube | |
|
Adjustment
Knobs
FIGURE 3 Adjusting Height
Part No 1141466 | 3 | Walker Platform Attachment |
