This cordless phone can store 20 telephone numbers and names
that you dial just by pressing p and two of the number
buttons. The telephone memory works with the Memory Match
and Priority Ring features. When you receive a call from a
number you’ve stored in memory, the screen displays the name
information as you’ve stored it, not as the service sends it (for
example, you can store "Mom"). Additionally, the phone can
alert you to calls from numbers you’ve stored in memory, with
a special Priority Ring, and with a VIP display on the screen.

Storing Numbers in Memory

1Make sure the handset is off.
2Press p.
3Enter the phone number (up to 24 digits).
4Press p.
5Press any number buttons from 01 to 20 for the
memory location where the number is to be stored.
6A four-part tone confirms that the number was stored
properly. If you hear a long buzzing tone, or nothing
at all, press P, then follow the steps above to
store thenumber again.
For example, to store 555-1212 in memory location 9,
press p, 5, 5, 5, 1, 2, 1, 2, p, 0, 9.
NOTE: The handset exits programming mode if you don't press
a button within 30 seconds, or if you press P.

Storing Names with Numbers

1Press and release p.
2Use the keypad to enter the telephone number.
3Press and release m.
4Use the keypad to enter letters. Press once for the
first letter on the button. Press twice for the second
letter on the button. Pressthree times for the third
letter on the button. Press L to back up if you
make a mistake, or use < or > to move to a letter
and type over it.
TELEPHONE MEMORY
To enter subsequent letters from the same key (for
example, e and f), use > to move the cursor to the
next space.
5Press and release p.
6Press the number buttons (01 to 20) for the memory
location where the name/number isto be stored.
7A four-part tone confirms that the number was stored
properly. If you hear a long buzzing tone, or nothing
at all, press P, then follow the steps above to
store thenumber again.

Storing Call Records in Memory

You can transfer information from the Caller ID
history into the telephone memory.
1Press and release I.
2Use + or - to locate the call record you want.
3Press and release p.
4Press and release p.
5Press the number buttons for the memory location where
you want to store the call record.

Viewing Numbers in Memory

1Press p.
2Press m.
3Press + or - to scroll through memory
— OR —
Enter the 2-digit memory location (01-20).
4Press D to dial the number
displayed on the screen.

Dialing Memory Numbers

1Press P.
2Press p.
3Press the number buttons for your memory location.
4Press d.
For example, to dial the number stored in location 9,
press P, p, 0, 9, d. To check a
number before dialing, see "Viewing Numbers in
Memory" above.

Storing a Number Just Dialed

Whenever you make a telephone call, you can store the number
you dialed in memory. Press R instead of entering the tele-
phone number when “Storing Numbers in Memory.”

Replacing a Stored Number/Name

You can replace a stored number/name by storing a new
number/name in its place.
5