AT&T 7700 user manual L L E R I D

C A L L E R I D

Program Area Codes

You must program the system to recognize your home area code in order to use the Display Dial feature described later in this section.

After programming your home area code, the screen displays the 7 digits of the number (without the area code) when you receive a call from this area code. When you use the Display Dial feature, the unit dials the 7 digits without inserting a "1" or an area code.

You can also program up to two other local area codes. These are area codes that do not require dialing a “1” before them. After programming, if you receive a call from one of these area codes, the screen displays the ten digits (3 digits of area code plus 7 digits of phone number). When you use Display Dial, the unit dials ten digits, without inserting a “1” before the the area code.

1Press m, -, -. The screen displays the current area codes, if there are any.

2Use the keypad to enter your home area code, then up to two other local area codes (if applicable). You can skip entering an area code by pressing <or >.

3When you’ve finished programming area code(s), press m.

Call Waiting

When you subscribe to Call Waiting and receive a call while us- ing the 7700, the screen briefly displays Call Waiting, then indicates the name and number of the caller. Press Fto ac- cess the call. Press Fagain to return to the original call.

Message Waiting and New Call Light

This light stays on when you have received call information but have not yet reviewed it. If you subscribe to a voice mail service, this light flashes if you have unretrieved messages waiting.

O P E R A T I O N

Reviewing Call History

The screen displays call information for about 15 seconds after it has been received.

1	Press I. The screen displays the number of
	new calls, or No New CID and the total number of
	calls in the call log.
2	To review earlier calls, press -.
3	Press >to view time and date of call.
	>
4	To advance through call history from an earlier call,
	press +. The screen displays TOTAL=XX to indicate
	you have reviewed all the calls in the call history.

Removing Call Records from History

1Press I.

2Use +or -to reach the call record you want to remove.

3Press L. The screen displays Clear?.

4Press Lagain to erase the displayed call record.

To Remove All Call Records

1Follow Steps 1 and 2 above until the screen displays Total and the number of calls.

2Press L. The screen displays Clear?.

3Press Lagain to remove all call records.

Display Dial

As you review calls in history, you can dial a displayed phone number by pressing d. Make sure to program your local area code(s) as described in "Program Area Codes."

8