AT&T 8503T manual Select Ring and Ringer Volume

Select Ring (and Ringer Volume) [ ✓ ]

To select a personalized ringing pattern for your voice terminal

Note: Although the Conference/Ring button is labeled [ Conf ] , it is also used for selecting a personalized ring for your voice terminal.

1While handset is on-hook, press [ Program ]

●Red light next to [ Program ] goes on steadily

2Press [ Conf ]

●Voice terminal plays current ringing pattern

3Press [ * ] to hear next ringing pattern

Note: There are 8 available ringing patterns from which to choose.

4Press [ * ] until you hear the desired ringing pattern for your voice terminal

5Press [ # ] to save the desired ringing pattern

●You hear 2 rising tones, and voice terminal returns to normal call-handling mode

●Red light next to [ Program ] goes off

Note: If at any time you want to discontinue the Select Ring process, press [ Program ] . (Red light next to

[ Program ] goes off.)

To adjust loudness of ringer

1While on-hook, press appropriate side of the Volume control button

●To raise the volume, press the right half of the Volume control button labeled [ ∧ ] ;

●To lower the volume, press the left half of the Volume control button labeled [ ∨ ]

14