Self-Test
[
✓ ]To test the lights, ringer, Note: Although the Drop/Test button is labeled
and dial pad keys on your [ Drop ] , it is also used to initiate a self-test of your
voice terminal voice terminal.
1While the handset is on-hook, press [ Program ]
●Red light next to [ Program ] goes on steadily
2
Press [
Drop
]
●
●
You hear a tone
Red Message light goes on steadily
3After you hear the tone repeated, press any button on
the voice terminal
●The voice terminal emits a key click
●As you press [ Mute ] , [ Program ] , [ Conf ] , and
[ Transfer ] , the lights next to these buttons go
on steadily
●As you press [ Redial ] , [ Memory ] , [ Drop ] , and
[ Hold ] , the lights next to [ Mute ] , [ Program ] ,
[ Conf ] , and [ Transfer ] flash
4
5
6
Pick up handset and press each dial pad key
●
●
When you pick up the handset, the Message
light flashes
Handset emits tone as each key is pressed
Hang up handset
Press [ Program ] and then [ Drop ] to end test and
return to normal call-handling mode
●All lights on voice terminal flash once
Note: If you do not press [ Program ] and [ Drop ] to
end the self-test, the voice terminal automatically
exits testing mode after 30 seconds.
15