Telephone memory

Store a pause in a memory number

Press and release REDIAL/PAUSE once to store a three to four second pause in the dialing sequence. Each additional press will add another three to four second pause.

NOTE: Each three to four second pause counts as one digit when storing numbers in telephone memory.

Dial a number in one-touch memory

To dial a number stored in memory locations , or :

1.Lift the handset and wait for a dial tone.

2.Press the memory button ( ,

or ) where the number is stored. The number is dialed automatically.

Dial a number in two-touch memory

To dial a number stored in a two-touch memory location ( 0 - 9 ):

1.Lift the handset and wait for a dial tone.

2.Press and release MEM, then press the memory button ( 0 - 9 ) where the number is stored. The number is dialed automatically.

Erase a memory number

To erase a memory location, store a different telephone number in the same location.

12

Page 15
Image 15
AT&T 915 user manual Store a pause in a memory number, Dial a number in one-touch memory, Dial a number in two-touch memory