5.Connect the handset to the telephone.
Plug the coiled cord into the handset jack on the left side of the base unit. Plug the other end of the coiled cord into the handset, then hang up.
6.Connect the line cord to a modular wall jack and mount the phone on the wall jack as shown.
Make sure the cord snaps firmly into place. Place the phone on the wall jack mounting studs and pull down until it is held securely.
7.Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear a dial tone, slide the VOLUME switch to the right. If you still do not hear a dial tone, see the In case of difficulty section beginning on page 15 of this user’s manual.
Installation
7
