AT&T 9371 user manual Edit a Number Stored in the Directory, Dial Edit Erase

9371_book_1ATT 8/14/01 10:00 AM Page 14

TELEPHONE MEMORY

AT THE HANDSET

4When you finish entering the name, press s. The screen displays ENTER NUMBER.

5Enter the telephone number. Use < to backspace and make a correction. Press r to store a pause in the dialing sequence.

6Press s or pto store your entry. You’ll hear a series of beeps confirming the entry.

Note: When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be able to store a new number until you delete a stored number.

Edit a Number Stored in the Directory

1Press > (DIR). The screen displays DIRECTORY.

2Press < or > to scroll alphabetically through numbers stored in the directory

—OR—

Press the dial pad key for the first letter of the entry you want to edit.

3When the screen displays the number you want to edit, press s. Then press > until EDIT flashes.

DIAL EDIT ERASE 9735550123

4Press s. The screen displays the name and number. The flashing cursor appears at the end of the name. Use <, > and the dial pad keys to edit the name. Press s to move on to edit the number.

5Press s to save the edited information. You’ll hear a series of beeps confirming the change.

14