AT&T CL2909 user manual Installation options, Tabletop installation, Check the mounting bracket

Telephone wall jack

Getting started

Installation options

The telephone base comes with the mounting bracket already installed for tabletop use. If you want to mount your telephone on a wall, use the provided wall bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers. You might need a professional to install the mounting plate.

If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter (not included) between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.

Tabletop installation

Follow instructions below to install your telephone to tabletop position.

1. Check the mounting bracket.

The telephone arrived with the mounting bracket positioned for tabletop use. Make sure it is secure by pressing the two feet.

2. Connect one end of the long telephone line cord to the jack labeled TEL on the back of the telephone.

Telephone
line cord
	DSL filter (not
TEL DATA	included) is
	required if you
	have DSL high-
	speed Internet
3. Connect the other end of the line cord to a wall jack.	service.