Directory
LOWER |
LOWER |
Directory operation
Store numbers and names in the directory
1.Press DIRECTORY. Then press CALL LIST 
or CALL LIST 
to scroll to STORE.
2.Press OPTIONS, the screen displays ENTER NUMBER.
3.Enter the telephone number (up to 24 digits) you want to store.
Press REDIAL to store the last number dialed.
NOTE: If the redialed number is longer than 24 digits, you will hear an error tone if you are lifting the handset or the speakerphone is activated while storing the number. The number cannot be stored.
4.Press OPTIONS, and the screen displays ENTER NAME.
5.Use the characters chart on page 22 to enter a name (up to 15 characters).
Use CALL LIST 
to backspace and CALL LIST 
to advance or add a space. When you want to enter two characters in a row that share a dial pad key (for example M and O), you must press CALL LIST 
to move the cursor to the next position. The screen automatically returns to idle mode if you do not press a dial pad key within 15 seconds.
6.Press OPTIONS to store the name and number.
Store a pause or flash in a directory number
Press CALL LIST 
twice to store a pause in the dialing sequence (P displays). Press FLASH to store a flash in the dialing sequence (F displays).
NOTE: To exit the directory at any time without saving changes, press CLEAR.
23
