Appendix
Troubleshooting
The charge light is off or blinking.
•Make sure you plug the power and line cords in correctly and securely.
•Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.
•Clean the cordless handset, charger and telephone base charging contacts each month with a pencil eraser or cloth.
•A blinking CHARGE light is an indication that the battery is not connected to the handset or is missing completely. Ensure that the battery is installed properly.
Common cure for electronic equipment.
If the telephone does not seem to be responding normally, try putting the cordless handset in the charger. If it does not fix the problem, do the following (in the order listed):
1.Disconnect the power to the telephone base.
2.Disconnect the cordless handset battery.
3.Wait a few minutes.
4.Connect power to the telephone base.
5.Completely remove the battery. Replace the battery and place the cordless handset into the telephone base or charger.
6.Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place.
17
