AT&T E2120 To set the wakeup alarm, To set the wakeup time, To select wakeup alarm type

Models: E2120

1 32
Download 32 pages 29.08 Kb
Page 18
Image 18

91-000040-010-000_E2120ManualMP_R0Aug0904.qxd 8/9/2004 10:06 AM Page 16

1 WAKE TIME

PM 12:00

Press and hold until time blinks.

2 HOUR

AM 6:00

Press to select wakeup hour (press and hold to advance quickly)

3 MIN

AM 6:30

Press to select wakeup minute (press and hold to advance quickly)

4 WAKE TIME

AM 6:30

Press to set wakeup time to displayed time.

5 WAKE MODE

PM 12:00

Press repeatedly to select wake mode (radio, buzzer, or alarm off).

Awake to radio

Awake to buzzer

No icon = Alarm off.

Clock Radio Operation

To set the wakeup alarm

To set the wakeup time

To set the alarm clock, press and hold WAKE TIME until the display begins blinking, then follow the steps at left to set your desired wakeup time.

While setting the wakeup time, you can press HOUR or MIN to advance by 1 digit, or hold down the buttons to advance more quickly.

You can press the WAKE TIME button at any time to check your programmed wakeup time.

To select wakeup alarm type

Press the WAKE MODE button to choose whether you want to be awakened by the radio or the build-in buzzer.

Each time you press WAKE MODE a different icon will appear to indicate your choice, as shown at left. When no icon appears the alarm is turned off, and you will not be awakened.

NOTE: If you set the wake mode to Radio, make sure the radio is tuned to a station with a strong signal, and the volume is set high enough to awaken you (see page 18).

NOTE: If electrical power is lost for more than 15 minutes, the wakeup time will change to 12:00 and you will have to reset it.

16

Page 18
Image 18
AT&T E2120 user manual To set the wakeup alarm, To set the wakeup time, To select wakeup alarm type