AT&T E5862BC user manual Handset settings

Models: E5862BC

1 56
Download 56 pages 26.84 Kb
Page 18
Image 18

91-5730-10-00_E5862BC CIB_R1.qxd 4/30/2003 11:53 AM Page 16

Select Settings.

1Settings

1Appearance

Set screen background color.

1Set Time

Set time.

1Contrast

Adjust screen contrast.

1Phone Setup

Enter base ID to register handset. Choose Tone or Pulse dialing.

1Language

Choose screen display language.

1Reset Settings

Clear phonebook.

Restore factory default settings.

Telephone Operation

Handset settings

Note: After selecting any option below, press the middle Navkey button to confirm your choice.

Appearance

At this menu you can choose one of four display screen background colors.

Set time

Select this menu to set the time displayed on screen. You must enter four digits (09:23). Using the NavKey, press the DOWN button, then use LEFT/RIGHT buttons to set AM or PM. After you set the handset time once, it will thereafter be set automatically with incoming Caller ID information if you have this service (see page 5). You can also turn off the time display at this menu.

Contrast

At this menu you can adjust screen contrast to one of eight levels to maximize readability in different lighting conditions.

Phone setup

Choose this option to register a new handset or select dialing mode. To register, you must enter the 15-digit ID number of the base. (To find this number, go to the base, press MENU, scroll down to select DISPLAY BASE ID, then press OK.)

The phone is preset at the factory to use TONE dialing. You should change it to PULSE only if you do not have touch-tone dialing service.

Language

At this menu you can select the language used in all menus and screen displays. Choices are English, Español, Français.

Reset Settings

At this menu you can delete all entries from your hand- set phonebook, or restore all factory default settings.

16

Page 18
Image 18
AT&T E5862BC user manual Handset settings