Getting started
Battery installation & charging
Press in and downward on the tab to open the battery compartment cover.
|
| Place the battery | Slide the battery com- |
Plug the battery connector | |||
into the handset battery | and wires in the | partment cover up until | |
compartment, matching the | compartment. | it clicks into place. | |
color coded label. |
|
| |
After battery installation, place the cordless handset in the telephone base or charger and allow to charge for at least 16 hours before use. You can keep the battery charged by returning the cordless handset to the telephone base or charger after each use. When the battery is fully depleted, a recharge takes about 16 hours. The talk time on a fully charged battery is about five hours depending on environmental conditions, and the standby time is approximately five days. Actual battery life will depend on the usage conditions, and the age of the battery.
Caution: Use only the supplied rechargeable battery or AT&T replacement battery model 3301 (SKU 91076, part number
Plug charger power adapter | Place the cordless hand- | ||
into the jack on the under- | set in the telephone base | ||
side of the charger, then plug | or charger to charge for | ||
the adapter into an electrical | at least 16 hours before | ||
outlet not controlled by a wall | first use. | ||
switch. |
|
|
|
|
|
|
|
Return cordless handset to the tele- phone base or charger to recharge when this symbol appears.
(When in use the cordless handset will beep when battery is low).
BATTERY LOW
8/12 10:06am
Low battery indicator.
Off hook mode.
3
8/12 10:06am
Low battery indicator.
Idle mode.
