AT&T E5945B user manual Changing feature options, Feature options

16

1.	SETUP
	Press until the desired feature
	is heard (see list on right).

Answering system operation

Changing feature options

Setup features can be changed to program how the answering system operates. Press SETUP repeatedly to hear each feature.When you hear the feature you want to modify, press SKIP or REPEAT to change the set- ting.

Feature options	(Default settings underlined).
System announces:	Feature description:

2.	SKIP or
	REPEAT

Press until the desired selection is heard.

3.	SETUP
	Press to set selection and

"Number of rings", current set- ting, then "To change the setting, press SKIP or REPEAT; to con- tinue setup, press SETUP". Options: 2 / 4 / 6 /toll saver

Choose the number of rings before the system answers a call. When toll saver is active, the system answers after two rings if there are new messages, and after four rings if there are no new mes- sages. When retrieving messages from a long-distant call, you may disconnect the call after three rings so that long-distant charges will not be charged.

move to next setup option.

- OR-

“Base ringer”, current setting,	Choose this option to turn the base ringer
then “To change the setting	volume off, low or high (does not affect
press SKIP or REPEAT; to con-	cordless handset)
tinue setup, press SETUP”.
Options: off/ low/ high

(PLAY/STOP)

Press to set selection and exit setup.

"Remote access code", current setting, then "To change the set- ting press SKIP or REPEAT; to continue setup, press SETUP". Options: (enter two-digit code)

19­

Enter a two-digit number (10-99) for remote access from another telephone (see page 36).

NOTE: Press and hold SKIP or REPEAT to increase or decrease the remote access code number by 10.

"Message alert tone", current	When on, the telephone beeps every 10
setting, then "To change the set-	seconds when there are new messages.
ting press SKIP or REPEAT; to
continue setup, press SETUP".
Options: on / off

32