TELEPHONE OPERATION
AT THE HANDSET
Changing Channels
This cordless telephone has an advanced AutoSelect feature that minimizes the chance of interference. When the phone is looking for a clear channel, the screen displays SEARCHING.... If it is unable to locate a clear channel, the screen displays TRY AGAIN. Hang up and try your call again.
In the unlikely event that you notice noise or interference while using the handset:
1Press L.
2If the interference does not clear, move closer to the base and press Lagain until you find a clear channel (your call will not be interrupted).
NOTE: You must be within range of the base to change channels (see the OPERATING RANGE section of this manual).
Headset Jack
You can use this telephone
1Plug the headset into the jack located on the left side of the handset. Do not force the connection, but make sure the plug fits securely.
2Follow the instructions under “Make,Answer, or End a Call” on page 19.
3If you wish, attach the belt clip (see page 5 in the INSTALLATION section of this manual).
NOTE: The earpiece and microphone on the handset are disabled when the headset is plugged in.
22
