AT&T HS-8270 Remote Access Commands

ANSWERING SYSTEM OPERATION

AT CORDLESS HANDSET OR TOUCH TONE PHONE

36

Command:

Hang up,or if you are using the handset,

press a.

Press * 9,then press 9; system

announces current selection.Press 6or

4to hear other selections,press 9to

save,press 5to exit.

Press * 8;system announces day

setting,followed by,“To change, press 6

or 4. To change the hour,press 8.” Press

4to move back a day,or 6to move

forward a day.

Press 8;system announces hour setting,

followed by,“To change,press 6 or 4. To

change the minutes, press 8.” Press 4to

decrease or 6to increase hour.

Follow the same procedure to change

minutes setting. System announces new

time setting.

Press 0;system announces current status.

Press * 0;system announces,“The

machine is off.”

When system is off,it answers after 10

rings,announces “The machine is off”

and beeps twice. Press * 0;system

announces,“The machine is on.”

Press #when system answers after 10

rings;begin speaking after system beeps.

NOTE: The system beeps twice to indicate it is ready to accept a

command.

Remote Access Commands

Function:

End remote access call

Select an Outgoing

Announcement

Set the Clock

Review On/Off Status

Turn System Off

Turn System On

Record Message When

System is Off

Contents

Main Page CONTENTS BEFORE YOU BEGIN........................3 IN CASE OF DIFFICULTY................46 INSTALLATION.................................4 FEATURE SETUP..............................7 BEFORE YOU BEGIN Page Table/Desk and Wall Installation INSTALLATION Softkeys Message Window Display for Feature Setup Window Displays: When: SU CH SA Telephone Feature Setup Dial Mode Handset Ringer Off / Battery Save Handset Ringer 8 Caller ID Feature Setup Program Home and Local Area Codes Caller ID with Call Waiting Call List Options 9 Answering System Feature Setup Select Your Announcement Ring Select / Toll Saver 11 Audible Message Alert Change Remote Access Code Priority Call Signal 12 Change Priority Calling Code Review Feature Settings Record Your Announcement from the Base 13 Delete an Announcement Set the Clock Caller Specific Outgoing Announcement Feature Setup Talking Caller ID Feature Setup Record Caller Specific Outgoing and Talking Caller ID Announcements from the Handset 15 Page 17 Review Caller Specific Outgoing and Talking Caller ID Announcements 18 Delete Caller Specific Outgoing and Talking Caller ID Announcements Make, Answer, or End a Call Handset Volume Flash OR Preview a Number Redial Temporary Tone Mute Hold Intercom Record a Phone Conversation Changing Channels Headset Jack Speaker/ Base Ringer Volume Make, Answer, or End a Call Hold Mute Flash Page/Intercom Handset Locator Store a Number in Memory Store a Pause in a Memory Number Store a Name with a Memory Number 26 Number of Key Presses Dial Key 1 2 3 4 5 Replace a Stored Number Store a Number and Name from Call History View Memory Numbers Delete Memory Numbers Edit Memory Numbers Priority Ring Numbers Dial a Memory Number from the Handset Dial a Memory Number from the Base Audible Indicators About Mailboxes Announcement Play/Silent Answering Calls Call Screening/Intercept Announcement Bypass Record a Memo Listen To,Save & Delete Messages Function: Button: Message Window Display Call Screening Connect with the Answering System 34 From the Cordless Handset From a Touch Tone Phone Remote Access Commands Function: Command: 36 Command: Remote Access Commands Function: Voice Help Menu Audible Signals 37 Signal: Means: Call Waiting Incoming Call History Memory Match Review Call History Display Dial Delete Call Records from Call History Delete a Specific Call Record Delete All Call Records Caller ID Display Messages OPERATING RANGE Battery Life Operation: Approximate Battery Life: 43 Charge the Handset Battery Pack Page Replace the Handset Battery Pack If the phone does not work at all, check these items first: If you have no dial tone: If you hear a two-beep signal when you try to use the handset: To re-initialize the handset and base: If you hear noise or interference when using the phone: If the phone does not ring when you receive a call: If your telephone misdials or you dont hear the other person right away: If the callers name or phone number is not displayed: If the callers name or phone number is not displayed during Call Waiting: If speakerphone conversation sounds distorted: If messages are incomplete: If you have difficulty hearing messages: If the system does not answer after the correct number of rings: Page Answering System HS-8270 Remote Commands Remote Command Press