AT&T personal speed dial numbers manual Dial Code Features

Dial Code Features

You can use a Dial Code feature in either of two ways:

■Press [Feature] followed by its 2-digit Dial Code (except Do Not Disturb and Privacy).

■Press a button programmed with the feature (see "Program- ming" on page 4).

FeatureUse

[Feature] [0] [2]

[Feature] [0] [3]

[Feature] [0] [4]

[Feature] [0] [5]

[Feature] [0] [6]

[Feature] [0] [8]

[Feature] [0] [9] + Ext. Number

[Feature] [1] [0] + Ext. Number

[Intercom] [6] + Ext. Number

[Intercom] [6] [6]

[Intercom] [7] [0]

[Intercom] [7] [1]

[Intercom] [*] [7] [1]

Can use this feature only if programmed onto a button with lights (see page 4).

Do Not

Disturb

Exclusive Hold

Recall

Save Number Redial

Last Number Redial

Conference Drop

Privacy

Touch-Tone Enable

Message

Light On

Message

Light Off

Call Pickup

Pickup Group

Loudspeaker Paging

Group Calling

Group Paging

Prevents any calls from ringing at your phone. Transferred calls return to sender and inside calls get a busy signal. Outside callers hear the usual ringing. Recommended only if someone else answers your outside calls. To use this feature, you must program [Feature] [0] [1] on a button with lights.

Places a call on hold so other extensions with the line cannot pick it up.

"Recalls" a dial tone. If you are not on a PBX or Centrex system, use Recall to end a call without hanging up-you will get a dial tone and can then make another call. Otherwise, use Recall to get the PBX/Centrex dial tone.

Saves the last number you dialed into a tempo- rary memory. Before you hang up on a busy or non-answering call, press [Feature] [0] [4] . Once saved, you can radial it at any time by pressing [Feature] [0] [4] again. The number stays in the memory until a different one is saved. System Speed Dial numbers cannot be saved.

Redials the last number you dialed (except System Speed Dial numbers).

Drops the last outside party added to a conference call.

Prevents other people with the same line from joining your calls. To use this feature, you must program [Feature] [0] [7] on a button with lights.

When on a rotary line, allows you to across phone services such as “Bank-by-Phone” that require you to dial digits. After you make the call to the service and are asked to enter touch-tone digits, turn on Touch-Tone Enable to change the rest of the digits you dial to touch-tone.

Turns on the message Iight on another MLS phone (you manually enter the extension).

Turns off the message light on another MLS phone (you manually enter the extension).

Picks up a call ringing at any system extension.

Picks up an outside call ringing at any Pickup Group extension.

Connects you to the (optional) loudspeaker system.

Simultaneously rings all Calling Group extensions; you connect to the first extension that answers.

Simultaneously voice signals all Calling Group extensions; you connect to the first extension that answers.

5