AT&T SBC-420 user manual Paging a Single Extension, Answering a Single Extension, Room Monitor

TELEPHONE OPERATION

ANSWERING A SYSTEM WIDE PAGE (cont.)

Any 420 in the system can answer the page and talk to the paging station.

1 . Press PAGE to answer. You can use the speakerphone, headset or handset to converse.

2 . To end, simply hang-up.

NOTE:

■Only one extension can answer a system wide page at a time.

PAGING A SINGLE EXTENSION

	1 . Extension 22 presses PAGE, then enters	2 . Extension 11 receives the page:
	“11” to page extension 11.	PAGE 22
	PAGE 11	CID:000/001
TELEPHONE	CID:000/001
	ANSWERING A SINGLE EXTENSION PAGE

AUTO-MUTE OFF AT RECEIVING EXTENSION

When an extension receives a page, the phone will beep and the speakerphone will automatically be activated. You can begin speaking or switch to the handset or headset.

AUTO-MUTE ON AT RECEIVING EXTENSION

When an extension receives a page, the phone will beep and the speakerphone will be activated and the MUTE indicator will light. To answer the page, press MUTE and begin speaking. The handset or headset can also be used.

NOTE:

■If a paged extension is in use or DND is on, the paging station will hear a busy tone.

ROOM MONITOR

The paging feature can be used as a room monitor.

1 . Press PAGE followed by the extension number to be monitored.

2 . Activate MUTE by pressing MUTE so sounds on the monitoring side are not broadcasted.

3 . To end the monitoring, press SPEAKER.

NOTE:

■An extension cannot be monitored if the AUTO-MUTE feature is set to ON at that extension.

TELEPHONE OPERATION

MAKING AN INTERCOM CALL

1 . Press INTERCOM followed by the number of the extension you wish to call.

ICM 22

CID:000/001

2 . The extension you called will hear the intercom ring and the display will indicate which extension is calling.

ICM 11

CID:000/001

NOTE:

■If the extension being called is in use or DND is ON, a busy ring will be heard.

ANSWERING AN INTERCOM CALL

1 . Press INTERCOM. The speakerphone will activate and you can begin speaking. The handset or headset can also be used.

2 . To end the call, simply hang-up.

MAKING AN INTERCOM CONFERENCE CALL

1 . Make or answer a telephone call.

2 . Press INTERCOM and enter the number of the extension with which you want to conference.

3 . When the extension answers, press CONFERENCE to join all parties.

NOTE:

■An intercom conference call cannot be placed on hold.

TELEPHONE

28 29