AT&T TL760 quick start Headset base installation, Getting started

Getting started

Headset base installation

Option 3: Headset base with corded phone for multiple line system or digital business system installation (TL7610)

With this installation, you can make and receive calls using the LIFTER MODE without a lifter.

1.Plug the small end of the headset base power adapter into the POWER jack (green dot) at the back of the headset base.

2.Plug the headset

base power adapter into an electrical outlet not controlled by a wall switch.

DSL filter (not included) required if you have DSL high-speed Internet service.

4.Plug one end of the 4-conductor telephone line cord

into the BASE JACK (orange dot) jack on the headset base.

3.Unplug the curly handset cord from the telephone. Plug the end of the curly handset cord into the

CURLY CORD (light blue dot) jack on the headset base.

Curly handset cord

7.Plug the other end of the telephone line cord into a telephone jack.

6.Plug one end of the telephone line cord into the telephone jack of the corded phone.

5.Plug the other end of the 4-conductor telephone line cord into the handset jack of the corded phone.