Getting started
Headset base installation
Option 1: Headset base with corded or cordless phone installation (TL7610)
1. Plug the small end of the headset base power adapter into the POWER jack (green dot) at the back of the headset base.
6.Plug the headset
base power adapter into an electrical outlet not controlled by a wall switch.
2.Plug one end of the telephone line cord into the TEL WALL JACK (red dot) at the back of the headset base.
3. Plug the other end of the telephone line cord connected into the line
Telephone splitter. line cord
4.Plug the line splitter into the telephone wall jack (or DSL filter if
Line splitter | you subscribe to DSL |
| Internet service). |
DSL filter (not included) required if you have DSL
Cordless or corded phone
5.Connect another telephone line cord between the telephone and the line splitter.