Getting started
Headset base installation
Option 2: Headset base
In order to make calls, you will need a telephone plugged into the same telephone line or a dial pad (TL7601 sold separately).
1.Plug the small end of the headset base power adapter into the POWER jack (green dot) at the back of the headset base.
2.Plug one end of the telephone line cord into the TEL WALL JACK (red dot) at the back of the headset base.
4.Plug the headset base power adapter into an electrical outlet not controlled by a wall switch.
Telephone line cord
DSL filter (not included) required if you have DSL
3.Plug the other end of the telephone line cord into a telephone jack.
NOTE: For more information about the accessory dial pad (model TL7601), visit