Getting started
Battery installation
Install the battery as shown below. After installing the battery, you may be able to make and receive short calls. For optimal performance, charge the headset battery for at least six hours before use. When not in use, recharge the headset by returning it to the headset base.
1. Press on both sides of the battery
compartment cover and lift the cover up and off.
2. Insert the battery into the battery compartment.
3. Push the battery plug into the connector inside the compartment and place the wires neatly inside the compartment.
4. Insert the tab on the bottom of the battery cover into the battery compartment. Press down gently on the battery cover until it snaps into place.
NOTE: Remove the ear hook from the headset before battery replacement.
