32
Registration and de-registration
Adding and registering headset
Your TL7610/7611 can accommodate up to two cordless
headsets. You can add a new headset (TL7600, sold separately)
to the headset base at any time. Each new headset must be
registered with the headset base before use (see page 34).
-OR-
You can register a maximum of two TL7610/7611 headsets
to an AT&T DECT 6.0 cordless telephone. The telephone base
recognizes and counts a headset the same as a handset. When
you register the TL7610/7611 to an AT&T DECT 6.0 cordless
telephone, the headset base acts only as a charger for the
headset. The LIFTER AUDIO ADJUST, VOLUME and MODE
controls on the headset base are inactive. You can place the
headset base anywhere you have an available power outlet. Do
not plug in the telephone line cord; you only need to plug the
headset base into a power outlet (see page 36).
Refer to your telephone user’s manual for the maximum number
of handsets that you can register to the telephone base. If you
have the maximum number of handsets registered, you need to
follow the de-registration information in your telephone user’s
manual.
Visit www.telephones.att.com for a list of compatible
cordless telephones.
You can only register the headset to one product at a time,
so the headset must be de-registered before registering to a
headset base or a cordless telephone (see page 34).
The first headset provided with your TL7610/TL7611/TL7650/
TL7651 has a blue ON/OFF light. When you register a second
headset, the ON/OFF light of the headset turns orange to help
you identify the headsets.
•
•