Getting started
MODE
Headset base installation
No lifter mode or lifter mode
There are two answer modes available on the headset base. The current mode is indicated by two lights on the front of the headset base named NO LIFTER MODE and LIFTER MODE.
•When plugging your headset base into the telephone wall jack (installation option 1 or 2), make sure the headset base mode is set to NO LIFTER MODE.
•When connecting your headset base to a multiple line corded telephone (installation option 3), make sure the headset base mode is set to LIFTER MODE.
To change the answer mode:
When the headset is not in use, press MODE on the headset base to select NO LIFTER MODE or LIFTER MODE. The corresponding light on the front of the headset base turns on to indicate the current mode.
For complete instructions on installing and using the handset lifter, see the TL7000 handset lifter user’s manual. You may also download the
manual at www.telephones.att.com.
NOTE: If you are using the handset lifter (model TL7611, or sold separately as model TL7000), you must use the LIFTER MODE.
11