Inserting a microSDCard

Insert a microSD card (not included) with the gold-colored contacts facing down.

Replace the back cover.

Removing the Battery and

SIM/microSD Card

Power off your phone.

Remove the back cover.

Lift the battery up and out.

Slide the SIM card out.

Slide the microSD card out.

Charging the Battery

Note: For best performance, charge the battery fully prior to using the phone for the first time.

Insert the charger’s connector into the charging port. Be sure to insert the connector in the correct orientation.

Do not force the connector into the port.

Plug the charger into a standard AC wall outlet.

When the battery is fully charged, unplug the charger and disconnect it from the phone.

2

Getting Started

Page 10
Image 10
AT&T Z998 manual Inserting a microSD Card, Removing the Battery SIM/microSD Card, Charging the Battery