Atech Tech SKAT-02 P, SKAT-02 M, PEGASUS-02 M, PEGASUS-02 P Miter CUT, Stock No / Part Name Qty

7.2. MITER CUT:

7.2.1. Press the saw blade down until it touches the cutting slot of the table. 7.2.2. Pull out the snap pin from its slot. (See Illustration 4)

7.2.3.Pull the table locking Bar to the left to unlock. (See Illustration 4)

7.2.3.Adjust the desired angle by turning the cutting head to the right or left. (See Illustration 5)

7.2.4.The cutting angles 15°-22.5°-30°-45° are fixed by releasing the snap. Pull the table locking handle to the right and fix the table (See Illustration 5)

Snap Pin

Table Locking Handle (Locked)

Table Locking Handle(Unlocked)

Illustration 4 Illustration 5

7.2.5.At intermediate angles (5°-10°-15°-35°-40° …) lock the table by pulling the table locking handle to the right.

No	Stock No / Part Name			Qty
30	141-112	BLADE SHAFT		1
31	112-019	BLADE SHAFT PULLEY		1
47	141-094		OUTER NUT WASHER	1
48	141-092		BLADE WASHER	1
49	114-018		BLADE INNER NUT	1
	WASHER
50	201-003		350 mm SAW BLADE	1
50	201-004		400 mm SAW BLADE	1
52	111-166		PEGASUS HEAD	1
52	111-243		SKAT I HEAD	1
54	141-093		WASHER 30x8x7	1
55	172-025		M8x16 HEXAG. SCREW	1

18

Operating and Safety Instructions