Powering Off
To power off your
1.Turn Off the ADC display
2.Turn Off the power to the computers.
Modifying the Installation
If you should ever need to take down, or change components on your
1.Power Off the installation as described in steps 1 and 2, above.
2.Unplug the power cords of both computers from their power source (wall socket, power adapter, etc.).
3.Unplug the cables that connect the computers to the
4.Unplug the cable that connects the ADC display to the
Components on an ADC connection are NOT hot pluggable. When shutting down or adding/removing components on your installation, you must follow the sequences described above. Failure to do so will result in damage to the equipment.
- 10 -
