1. Introduction

System Requirements

Consoles

ŠTwo VGA, SVGA, or multisync monitors capable of the highest resolution that you will be using on any computer in the installation

ŠTwo USB keyboards

ŠTwo USB mice

ŠStereo microphone and stereo speakers (Optional)

Note: If you connect a DDC type monitor to the Local Unit, the monitor that connects to the Remote Unit must be able to support the highest video resolution that the DDC monitor can provide.

Computers

The following equipment must be installed on each computer that is to be connected to the system:

ŠA VGA, SVGA or multisync card

ŠUSB Host Controller and Type A USB Port

Cables

ŠFor optimum signal integrity and to simplify the layout, we strongly recommend that you use the high-quality Custom USB KVM Cable that is provided with this package.

ŠCat 5e cable is the minimum required to connect the local and remote CE800B units. Cable of a lesser standard will result in degraded video signals. For best performance, we strongly recommend Cat 5e cable.

3