Clear Login Information
If you are unable to perform an Administrator login (because the Username and Password information has become corrupted or you have forgotten it, for example) you can clear the login information with the following procedure:
1.Power off the CE800B and remove its housing.
2.Short the jumper labeled J7.
3.Power on the switch.
The on screen display will show a message informing you that the password information has been cleared.
4.Power off the switch.
5.Remove the jumper cap from J7.
6.Close the housing and start the CE800B back up.
After you start back up, you can use the default Username and Password (see Overview, page 20) to log in.
43