CE800B User Manual
Administrator Configuration
The configuration settings that the administrator is allowed to make are explained in the following table:
Setting | Function |
|
|
SET USERNAME AND | This function is used to set Usernames and Passwords |
PASSWORD | for the Administrator and Users: |
| 1. One Administrator and four User passwords can be |
| set. |
| 2. After you select the Administrator field or one of the |
| User fields, a screen that allows you to key in your |
| username and password appears. The username and |
| password may be up to 12 characters long, and can |
| consist of any combination of letters and numbers. |
| 3. For each individual, key in the Username and |
| Password, then press [Enter]. |
| To modify or delete a previous Username and/or |
| Password, use the backspace key to erase individual |
| letters or numbers. |
|
|
OSD HOTKEY | Selects which Hotkey activates the OSD function: |
| [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. |
| Since the Ctrl key combination may conflict with |
| programs running on the computers. |
| The default is the Scroll Lock combination. |
|
|
HOTKEY COMMAND | Enables / Disables the Hotkey Command function. If the |
MODE | hotkey combinations conflict with programs running on |
| the computers, you may want to disable hotkey operation |
| by turning Hotkey Command Mode Off. |
| The default is On, which allows hotkey operation of the |
| switch. |
|
|
HOTKEY | Selects which combination activates Hotkey Setting |
| Mode (HSM): |
| [Num Lock] + |
| The default is [Num Lock] + |
| See Hotkey Setting Mode, page 25 for further details. |
|
|
USER AUTHENTICATION | If this setting is On, users have to provide a Username |
| and Password when they plug a flash drive into the USB |
| port of the Remote unit. |
| The default is On. |
|
|
22